Home » Firmware » Samsung » [Flash File] Samsung Galaxy Tab A 8.0 (2017) Firmware Download [Stock Rom]

[Flash File] Samsung Galaxy Tab A 8.0 (2017) Firmware Download [Stock Rom]

[Flash File] Samsung Galaxy Tab A 8.0 (2017) Firmware Download [Stock Rom]

[Flash File] Samsung Galaxy Tab A 8.0 (2017) Firmware Download [Stock Rom]

Samsung Galaxy Tab A 8.0 (2017) Firmware Download [Stock Rom].

This is a stock rom for Samsung Galaxy Tab A 8.0 (2017).

Samsung Galaxy Tab A 8.0 (2017) Firmware Download [Stock Rom].

Samsung Galaxy Tab A 8.0 (2017) Firmware Information

Rom Name Samsung Galaxy Tab A 8.0 (2017) Firmware Rom
Based On Samsung Stock OS
Rom OS Version Android 7.1 Nougat
Rom Type Odexed
Socs MSM8917 Snapdragon 425
Software needed Odin
Compress Zip format
Drivers Samsung  Drivers

 

Requirements to flash Samsung Galaxy Tab A 8.0 (2017) Firmware

  • Samsung Galaxy USB drivers.
  • Samsung USB drivers for your smartphone in particular.
  • Official Samsung Galaxy Tab A 8.0 (2017) Firmware.
  • The latest Odin for Samsung Galaxy.
  • A working detectable USB cable.
  • A Windows PC.
  • Latest Version of Samsung Kies.

Note that flashing a Samsung Galaxy Tab A 8.0 (2017) firmware to your phone erases everything in your phone including contents in internal storage. It is always very advisable to backup your contents to an external storage or a PC. If your phone is bricked and can’t be accessed, I guess there is nothing you can do.

Follow this procedure below if you wish to flash Samsung Galaxy Tab A 8.0 (2017) Stock Rom.

  [Flash File] A600GDXU1ARD9 Samsung Galaxy A6 2018 SM-A600G Firmware Download [Stock Rom]

Flash Samsung Galaxy Tab A 8.0 (2017) Firmware using Odin.

For you to flash the official Samsung Galaxy Tab A 8.0 (2017) Firmware Using Odin, you need to follow the processes below.

Each of the processes is very important and should not be skipped to avoid error or unsuccessful message when flashing your Samsung Galaxy Tab A 8.0 (2017).

  [Flash File] Cubot X6 Firmware Download [Stock Rom]

Follow this steps below to flash the firmware.

  • Download and Install Samsung Kies. It helps in installing the latest driver for your Samsung Galaxy smartphone.
  • Download and manually install Samsung Galaxy driver to your PC. It is very necessary because, most times, Kies doesn’t install them.
  • It is always advisable to restart your PC after installing all the necessary drivers to your PC.
    Select the right firmware for Samsung Galaxy
    Select the right firmware for Samsung Galaxy
  • Download the right Samsung Galaxy Firmware for your smartphone. Samsung Galaxy smartphones are not like other smartphones, you need to know many things about the phone. It includes the Model, Baseband, PDA, CSC, and Country. Flashing the wrong firmware can damage your phone. It is usually in a zip format, extract it and you will see the flash file in .tar format.
  • You can check the details of your Samsung Galaxy smartphone by going to Settings > About Phone and everything you need will be there.
  • There is an app called Phone Info Samsung, the app will show you, everything about your Samsung Galaxy smartphone.
  • Download and extract the latest version of Odin to your PC.
  • Power off your Samsung Galaxy smartphone and reboot it back to Download Mode.
    Boot Samsung Galaxy to Download Mode
    Boot Samsung Galaxy to Download Mode
  • You can boot a Samsung Galaxy Smartphone into download mode by pressing the volume down, power and home button at the same time till it enters download mode. You should not release the pressed button till your phone enters download mode. Use volume up button to continue.
  • Launch Odin for Samsung by right-clicking on Odin.exe and launching as administrator.
  • Click on AP and it will take you to search for the firmware you want to flash.
    Select Firmware to flash on Odin
    ODIN
  • You will need to locate it from where you extracted it and select it. It will load on Odin for few seconds.
  • If your kind of smartphone comes with other flashable files, you will need to select them too.
  • Be very very sure you untick repartition in the options settings. It can damage your phone if not unticked.
    Uncheck options on Odin samsung Galaxy
    Uncheck options on Odin Samsung Galaxy
  • Do not start yet. we are going to make sure that your Samsung Galaxy Smartphone is detected to Odin unless that, it won’t flash.
    Odin-device-added-for-Samsung-Galaxy
    Odin-device-added-for-Samsung-Galaxy
  • Connect your Samsung Galaxy Smartphone while still in download Mode, A message will appear in Odin which says, added with a driver name. Once it appears, you are good to go, if it doesn’t appear, you will need to reinstall your Samsung Galaxy device drivers.
  • Once it is connected, you can now click start to begin the flashing.
  • When flashing Samsung Galaxy Smartphone, you will see a progress bar both on the Samsung Galaxy Smartphone and on Odin software.
    Downloading process in Samsung Galaxy
    Downloading process in Samsung Galaxy
  • Do not try to do anything with your Samsung Galaxy Tab A 8.0 (2017) during the process.
  • Wait for it to finish flashing the rom to your Samsung Galaxy Smartphone and then restart your Samsung Galaxy Smartphone.
  • If you experience any problems, don’t hesitate to tell us and we are going to look in.
  [Flash File] BLU Studio 5.5 HD Firmware Download [Stock Rom]

If you don’t install all the necessary drivers, you may experience issues detecting your phone with the PC.

John Daniel

The Mastermind behind Blog The Tech, Love the future Tech and a big fan of Android Mobile Development. In his early 20s and an undergraduate of Electrical Electronics Engineering.

View all posts

Add comment

Your email address will not be published. Required fields are marked *

SUBSCRIBE TO GET UPDATE

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 345 other subscribers