Hey there, In this article, I will show you How to install firmware file on Realme smartphones.
You can use this method to flash Realme smartphones back to their default settings.
Smartphones can be tricky and sometimes, we just need to get things back to default.
Let us begin.
What do you need to make this happen?
The flash file requirements
A USB cable
Charged Realme smartphone.
Once you have all the requirements above, then proceed to the step below.
Please note that this wipes everything clean in your phone, better back it up.
How to install firmware file on Realme smartphones
First, download the firmware you wish to flash.
And also, extract the firmware from the zip or rar file.
Extract the driver and install one by one if needed.
Extract the Realme Flash Tool and launch the flash file.
Click the browse option on the Realme Flash Tool to locate the firmware file you extracted.
Launch the firmware and power off your Realme smartphone.
While off, boot your phone to fastboot by pressing the volume down and power button simultaneously till it boots to fastboot.
Connect your phone with the USB cable while on fastboot and click flash.
The flashing will begin.
Better drop your phone to avoid interrupting the process.
When the flashing finishes, reboot your phone and enjoy the new guy.
If you experience any problem, please don’t hesitate to tell us below.
If the firmware you downloaded needs another flashing method and not the one listed above.
Check these methods below for all Soc.
Flash any Qualcomm smartphone using Qualcomm Flash Image Loader (QFIL)
How to flash any MTK phone with Smartphone Flash Tool [SP Flash Tool]
Flash any Spreadtrum smartphone using Spreadtrum Upgrade Tool