TWRP For Allview P6 Pro

TWRP For Allview P6 Pro

This is a TWRP For Allview P6 Pro
TWRP For Allview P6 Pro

RECOVERY INFORMATION

Recovery Name TWRP
Recovery version 3.0.2
Based UnoOfficial
Ported Allview P6 Pro
Socs MediaTek
Socs version MT6735M
Software needed SP Flash Tool
Compressed IMG format
Drivers MTK Drivers

How to Flash TWRP For Allview P6 Pro

Allview P6 Pro is a MediaTek phone which means you will need an SP Flash Tool to flash recovery to it.

Requirements to flash TWRP to Allview P6 Pro

  • MTK Drivers.
  • Vcom Drivers.
  • A working detectable USB Cord.
  • An SP Flash Tool Software.
  • TWRP Allview P6 Pro.
  • A Windows PC.

Follow this procedure below.

Flash TWRP to Allview P6 Pro using SP Flash tool.

  • Download SP Flash Tool to your PC.
  • Download recovery.
  • Get the Scatter File for your phone.
  • Rename the downloaded recovery to recovery.img.
  • Place the recovery and scatter file in the same folder.
  • Launch SP Flash Tool.
    Select SP Flash Tool on your PC
    Select SP Flash Tool on your PC
  • Click on Scatter file.
    Click the scatter file
    Click the scatter file
  • Locate the scatter you placed with recovery.
    Select the Scatter file where your recovery is located in your PC
    Select the Scatter file where your recovery is located in your PC
  • Select the scatter file.
  • Make sure you select only recovery on SP Flash Tool.
    Make sure only recovery is ticked
    Make sure only recovery is ticked
  • Power off your phone.
    Click on Download
    Click on Download
  • Click Download on SPFlash Tool.
  • Plugin on your phone with a detectable USB Cord.
  • Wait for it to finish Flashing.
    Download Complete on SP Flash Tool
    Download Complete on SP Flash Tool
  • Done, Reboot your phone.

Disclaimer.

Flashing a custom RECOVERY to your phone will void your phone warranty.
We are not responsible for bricked rECOVERY. Please, do some research if you have any concerns about cUSTOM rECOVERY AND HOW THEY WORK.
Before flashing THIS RECOVERY, YOU are choosing to make these modifications, and if you point Your finger at us for messing up your device, we will laugh at you.

If you don’t install all the necessary drivers, you may experience issues detecting your phone with the PC.

Flash TWRP for Allview P6 Pro using Flashify

  • Download Recovery.
  • Place it on SD card root.
  • Download Flashify.
  • Install Flashify.
  • Open Flashify.
  • Enable Root access when prompt
  • Click Recovery Image.
  • Choose a file.
  • Find Recovery Image file.
  • Click Yup! to flash.
  • Reboot To Recovery.

If your phone is not yet rooted, you will need to flash this recovery using ADB sideload.
To do that.

Flash TWRP for Allview P6 Pro using sideload

  1. Copy the Downloaded TWRP to PC’s User Folder.
  2. Open CMD on PC.
  3. send this command
    fastboot flash recovery recovery.img
  4. Reboot your phone with this command
    fastboot reboot
  5. You now have TWRP on Your Phone.

If you want to root your phone. You can go ahead and root it by flashing a SuperSU file to your phone.
 

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More